ما "د لووپ"، یک فرایند ابتکاری را ایجاد کرده ایم، که با استفاده از فن آوری های جدید و روشهای مکانیکی، قادر به تبدیل پوشاک استفاده شده، ضایعات نساجی و کالای کهنه به پارچه ها و لباسهایی با نخی با کیفیت بالا هستیم. سپس پارچه خرد شده، با مواد زیست پایداری مانند پنبه ارگانیک، تنگل و پلی استر بازیافت شده ادغام میشود. پروژه "د لووپ"، تعهد ما برای شروع طراحی با یک فلسفه زباله صفر است.

بمحض اینکه یک پوشاک گردشی ایجاد شد، شما میتوانید آنرا با شناسه گردشی ما مجهز کنید. این شناسه با شفافیت به مشتریان شما می گوید این کالا را چگونه به روز کنید، مجددا استفاده کنید و بازگشت دهید و ترتیب دهندگان را قادر میسازد تا بهترین بازیافت کننده های مناسب را پیدا کنند.

خورشید برای حمایت از کل حیات بر روی کره زمین از گذشته وجود داشته است. و اکنون، دانشمندان، بعنوان یک راه حل سازگار با محیط زیست، امکان استفاده از انرژی خورشیدی که میتواند جایگزین سوختهای فسیلی شود را با کمک هوش مصنوعی، فراهم می سازند.

"گروه شرکتهای اسکای وی" مفهوم و ایده ای را ایجاد نموده است که میتواند آینده ی حمل و نقل جهانی را تغییر دهد. یکی از هیجان انگیزترین امکانات سیستم "اسکای وی" این است که حداقل ردپای زیست محیطی را بر زمین خواهد داشت. این شرکت تخمین میزند که نیاز "اسکای وی" به زمین ۱۰۰ برابر کمتر از سیستم های جاده ای حال حاضر است. ما اکنون مشغول "یونیفلای" سریع السیر مان هستیم که وسیله نقلیه ای با سرعت ۵۰۰ کیلومتر بر ساعت است. تصور کنید که اکنون چقدر سریع میتوانیم از مکانی به مکان دیگر جابجا شویم، و میتوانیم در شهر دیگری کار کنیم. این بدان معناست که حمل و نقل به محل کار دیگر مانع ما نمیشود.

کمپانی های سکایوی گروپ بر روی یک سیستم جدید حمل و نقل کار می کنند که می تواند جهان مان را تغییر دهد. آیا می توانید وسیله ی حمل ونقلی را نام ببرید که شش لیتر سوخت در ۱۰۰ کیلومتر، با سرعت ۵۰۰ کیلومتر در ساعت مصرف می کند؟ یک "بوگاتی ویرون"، که قیمتش سه میلیون یورو است، حداکثر سرعت ۴۳۰ کیلومتر در ساعت را دارد. و اگر سرعت ۵۰۰ کیلومتر در ساعت میداشت ۱۰۰ لیتر سوخت در ۱۰۰ کیلومتر را استفاده می نمود، اما ما فقط نیاز به ۶ تا ۸ لیتر سوخت در ۱۰۰ کیلومتر داریم. بنابراین، این حمل ونقل کارآمد تر و سازگارتر با محیط زیست است. و این جاده ها ده بار ارزانتر از جاده های رایج هستند.

برای هزاران سال، سگها به عنوان "بهترین دوست بشر" شناخته شده اند. و حالا، از طریق پیشرفت در تکنولوژی، می توانیم برای دوستان همراه سگ سان خود، راحتی بیشتر، امنیت و سلامتی تامین کنیم.

خورشید دائما انرژی پر مهرش را در کیهان می تاباند و امروزه، پیشرفتهای فنآوری به ما اجازه میدهند تا برای بکار انداختن طیف گسترده ای از وسایل عملی، از این انرژی بهره برداری کنیم.

Air taxis can be sustainable, comfortable vehicles for making short flights across congested cities. Besides being able to avoid busy street-level traffic, they can take off from and land on short runways or helipads. Today, we’ll find out what kinds of eco-friendly flying taxis will soon be available. Kitty Hawk’s operator Zephyr Airworks recently formed a partnership with Air New Zealand to bring the first fleet of air taxis to market. Mr. Yifang Xiong, co-founder of EHang, said, “The EHang 216, which can seat tow passengers, has been tested comprehensively and is essentially ready for mass production.”

Vehicle manufactures around the world are becoming ever more mindful of preserving the environment, and in recent years the number of small hybrid and all-electric vehicles being produced has surged. A wide variety of electric scooters is available on the market. At present, these scooters may look slightly more expensive than some gasoline-powered versions, but choosing an electric scooter over a conventional one is a good idea for several reasons: the lower cost of insurance, registration and maintenance, amazing performance, fast acceleration, the latest smart features, and most importantly, zero noise pollution and carbon emissions.

Scientists and engineers around the world are learning from our animal co-inhabitants and from bacteria about their skill in movement and are mimicking them to develop robots that can have a positive impact on the fields of humanitarian and medical aid. Today we’ll examine how these devices can help humans and animals in times of need or emergency. MIT’s Cheetah project was initiated to create a robot that is flexible, and capable of running, jumping, and landing safely like a cheetah. Besides nanorobots capable of swimming inside our bodies, tiny robots capable of crawling are also being studied by medical engineers and researchers.

Today we’ll learn about how technology can help people with disabilities gain or regain part of their physical functionality. Understanding the difficulties encountered by the physically challenged, scientists and engineers have been devoting their hearts and minds to research on ways to help them restore part of their mobility in daily life. They are all thinking big, they are taking risks. There’s a young woman and she’s basically designed and is now manufacturing a car that people in wheelchairs can just drive their wheelchair right into the car and start driving.

Our car, the Lightyear One, will be a statement car. You can drive on the power of the Sun. Lightyear One can constantly replenish its power using the Sun, and travel up to 800km (about 500 miles) on solar power alone, depending on the battery configuration. The car has an even longer range in sunny climates, going for days without charging when tested in such conditions. And the Lightyear One can power more than just its motors – it comes with a charging port just like a regular household power socket, and when parked, can be used to provide free solar electric power for household.

The essence of it is that the technology has the ability to enforce peace, as it can render all fighting vehicles useless. That’s not the direction that the Foundation wants to go, but peace is important for this world, and it’s time for peace. And we need as a society to recognize the importance of peace, because when we have peace, then we open a door. We open a door where a whole new universe becomes available to us. We have the ability to interact with our galactic family and friends. We have technologies that are beyond our imagination, and we evolve in ways that we should have evolved years ago when these opportunities presented themselves.

The Keshe Foundation conducts extensive research in how GANS materials can help relieve pain, improve health, and increase food production. I do a lot of research in the agricultural part in Mexico. And I have been using this in the food production of my garden. Your will see the plant grow bigger and they produce more fruits and vegetables. They become more healthy and more tasty. This is part of my research where I have increased the yield almost twice in the production, and the plants also grow up to three times bigger than the normal size when I do the application.

The Keshe Foundation is conducting research into new technologies that could benefit the future of our planet. The technology will be what I call a “game changer” in a lot of different areas; human health is one of the bigger areas. The body and the materials that are used in the Foundation are working in harmony with each other to balance each other out. So, the fields from our body and the fields from the material work in a symbiotic relationship. So, what you see is that if somebody has, for example, let’s say pain in their arm, the products and the technology that’s available can balance the fields of the body such that the pain no longer exists and healing can take place.

What is the future of global sustainable power? Professor Martin Green believes the prospects look very bright indeed! So, yeah, it’s an interesting future. You know, even things like producing iron, you can do it using electricity as a source, but it’s been more expensive than traditional blast furnaces and so no. But if electricity’s free, it changes the whole equation. So, a very exciting year that we are entering into, as the world switches from its dependence upon fossil fuels to something more sustainable, namely wind and solar.

Internationally renowned for his advancements in solar energy, Professor Green is known as the “father of photovoltaics.” As technology advances, solar energy is becoming more and more efficient. How long will it be before solar becomes our major source of energy? It’s going to happen very quickly in Australia. So, I have just come from South Australia. But it’s expected by 2024, they’ll be generating more energy from solar than the grids are going to be able to use. So that’s going to be some type of turning point.

Where will we get our power in the future? And what are the best sources of renewable energy? Professor Martin Green, the “father of photovoltaics” shares his insights on these questions. I see solar and wind, and I think most of the electricity companies here in Australia would see solar being their main source of electricity generation over the coming decades. So, they have no interest in building any more coal-fired plants in Australia, because it’s too expensive and the solar is going to become even cheaper. Internationally renowned for his work in improving solar energy, his group has held the world record for achieving the highest efficiency in silicon soar cells for 30 of the past 34 years.

The vehicle is powered by an electric motor which is embedded in the rear rim. The rims, airless tires, seat and frame are 3D printed. The electrical components incorporated into the motorcycle are the only parts that are not 3D printed. With no need for air, the tires remove the issue of tire punctures that riders of conventional motorcycles face. This bike and our other prototypes push the limits of engineering creativity and will reshape [additive manufacturing] technology as we know it.

Today’s program features Shoushi Bakarian, a Syrian-Armenian refugee undergraduate student living in Canada, who invented Ventus, a device that is capable of cooling the cabin air of many models of Cessna airplanes while providing a power source for charging hand-held devices. The unit’s microgenerator produces about 5 volts, 2.0 amps of renewable energy, which can charge electronic gadgets such as GPS devices, navigational aids, smartphones, and tablets.